PREWO – Bench Drilling Machines

Bench Drilling Machines
autofeed bench drilling machine bench drilling manual drilling machine
Bench Drilling Machine – Model 12-32 Model 12-32 with Hydraulic feed Bench Drilling Machine – Model 12-19
drilling machine Prewo Bench Type Drilling Machine Model 12-32 with geared head is streamlined yet extremely robust in construction. The high quality steel gears, quill and main spindles are hardened and ground.The gear box is lubricated by oil pump.The head can be moved up and down by manual rack & pinion mechanism. Tool ejector provided for easy tool removal from spindle.

  • Built to accuracy as per BIS 2426-1963 it has a solid steel column.
  • The operator has direct access to a 9 speed gear box with 2 levers for speed shift and speed.
  • Base made of Grey Cast Iron provided with ground surface and 3 T-Slots.
12-32 drilling machine Model 12-32 with Hydraulic Feed Unit – Feed control is with hydraulic feed unit with power pack, controls and fittings. The hydraulic feed rack is engaged with pinion and it is actuated by the cylinder rod. It transmits the motion to the pinion shaft and the quill will come down. Stroke control and rapid to feedrate switchover and return is by limit switches.

  • Built to accuracy as per BIS 2426-1963 it has a solid steel column.
  • The operator has direct access to a 9 speed gear box with 2 levers for speed shift and speed.
  • Base made of Grey Cast Iron provided with ground surface and 3 T-Slots.
manual feed drilling machine Model 12-19 (manual feed) The column can be rotated and mounted in any orientation in the horizontal plane, effectively allowing a work area over 360 degrees for special application.

  • Accuracy as per BIS:2426-1963.
  • Toughened steel column.
  • Rack and Pinion drive for up/down movement
    of the main spindle head.
  • Cast Iron base with T-Slots.
Technical Specification
MODEL 12 – 32 12-19
Max. drilling capacity of steel
in dia (mm)
20 20
Spindle motor (KW) 1.2 / 1.5 3.2 / 4
No. of spindle speeds 8 8
Spindle speed range (rpm) 90, 180, 250, 355,
500, 710, 1000,2000
350, 630, 970,1450, 2120
Feed Hydraulic Manual
Feed range (mm/rev) Variable Variable
Taper in spindle MT3 MT3
Distance between T-slots 110 110
No.of T-slots 3 3
Height x Width x Length 1450 x 950 x 445 850
x 500 x 1350
This entry was posted in . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

We would like to thank all our stand visitors for taking their time to visit our stand during INTEC in Coimbatore on 6-10 June 2019.